Gantry Hoist

Gantry Hoist right now on Cindy”s

#SLS1D31 Ship Yard Shaw Box 360 Ton Gantry Bridge Crane With 50 & 25 Ton Hoist $395,000.00

COFFING WRMT 3-TON GANTRY BRIDGE CRANE WIRE ROPE HOIST $4,995.00

WORKSTATION CRANE W/ GANTRY & DAYTON 500LB HOIST $4,500.00

2 TON SPANCO GANTRY CRANE / HOIST REMOTE ELECTRIC $4,000.00

COFFING 2-TON GANTRY BRIDGE CRANE WIRE ROPE HOIST $3,995.00

3-TON OVERHEAD ELECTRIC CHAIN HOIST GANTRY CRANE, WINCH, BOAT LIFT, CAR STAND $3,900.00

TWO TON HARRINGTON HOIST AND GANTRY CRANE $3,500.00

Yale 3000lb Electric Chain Hoist with Overhead Crane Gantry and Power Track $3,500.00

Gorbel 34′ L x 11′ T 1000 lb Capacity Gantry w/ Demag 2:1 500lb Hoist & Acc $2,995.00

DEMAG DKUN 5-500KV1F4 2200LB. GANTRY CHAIN HOIST $2,995.00

CM/LODESTAR H 1-Ton Chain Block Electric Chain Hoist W/Gantry Crane 100″ Frame F $2,500.00

Wallace 2 Ton Adjustable Gantry Crane Electric Hoist $2,500.00

Steel Vestil Gantry with CM Lodestar Hoist and Coffing Trolley $2,200.00

1-Ton Gantry Crane, 10′ W, 14′ H, Trolley, Lever Hoist $2,185.14

1-Ton Gantry Crane, 15′ W, 12′ H, Trolley, Lever Hoist $2,129.49

1-Ton Gantry Crane, 10′ W, 12′ H, Trolley, Lever Hoist $1,961.56

1-Ton Gantry Crane, 10′ W, 12′ H, Trolley, 10′ Hoist $1,887.03

Hoist Gantry 3 Ton Capacity (MIS2054) $1,650.00

PORTABLE MODULAR GANTRY CRANE HEAVY LIFTING HOIST MULTI-CONFIGURATION – USED $1,500.00

Chisholm-Moore 3-Ton Electric Cable Hoist Chain Gantry Beam Trolley 240V 3-Phase $1,099.99

Crane & Hoist: CONTRX GANTRY /TROLLEY 2 TS HAND CHAIN $850.00

CROUSE-HINDS ELEC HOIST GANTRY CH W14R C03040 NIB 40FT RETRIEVE REEL $595.00

MASS CRANE HOIST GANTRY CRANE 250 LBS $399.00

Gorbel® Aluminum Gantry Crane, 15′ Span & 9′-15′ Adjustable Height, 4000 Lb. Capacity Made from lightweight extruded aluminum track, the components of our Aluminum Gantry Cranes are easily lifted by one person, allowing the crane to be shipped easily to a job site and even carried up a ladder or staircase to a rooftop work area. The simple set up and break down of the gantry allows it to be collapsed and easily stored when not in use. The Aluminum Gantry comes with a top running ho…

Vestil Aluminum Gantry Crane – Adjustable Height, 4000-lb. Capacity, 12ft.L x 8in.H Beam, 9ft.6in. to 12ft. Under I-Beam Range, Model# AHA-4-12-12 $5,149.99 Adjustable-height aluminum gantry crane combines lightweight and rigid construction into one unit. Gantry crane is NOT to be moved while loaded. U.S.A. Note: All products should be inspected frequently to insure safe operation. Final testing and inspection is left to end user after final assembly has been completed. …

Vestil Accessory for Aluminum Gantry Cranes – Come-A-Long, Model# AHA-KIT $109.99 This Vestil set of 2 Come-A-Long units is designed for use with Vestil adjustable-height aluminum gantry cranes. For height adjustment only, NOT for lifting….

Jacks, Industrial Rollers, Air Casters, and Hydraulic Gantries (Safety Standard for Cableways, Crane $74.00 ASME B30.1-2009 for Jacks, Industrial Rollers, Air Casters, and Hydraulic Gantries. An American National Standard…

Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist) (An American National Standard, Revision of ASME B30.2-1996) $49.00 The American Society of mechanical Engineers (ASME) has developed codes and standards under procedures accredited as meeting the criteria of the American National Standards Committee. This book is regarding Overhead and Gantry Crane Standards. This book is 8.25″ x 11″….

Linear mill transforms to gantry mode.(TECH FOCUS)(Brief article): An article from: Mechanical Engineering-CIME $9.95 This digital document is an article from Mechanical Engineering-CIME, published by American Society of Mechanical Engineers on January 1, 2012. The length of the article is 339 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available immediately after purchase. You can view it with any web browser.Citation DetailsTitle: Linear…

There are many types of overhead cranes, all of which can pose hazards if they are not used properly and with adequate safety precautions. Strict guidelines and safety regulations are published by OSHA (US Department of Labor’s Occupational Safety & Health Administration Department). By adhering to these standards and rules, you protect your company from some of the injuries and lawsuits that can be served against companies requiring employees to operate heavy machinery.

Some of OSHA’s laws on crane design and manufacture govern the following things.

1-Uniform crane control design and manufacture

2-Trolley and bridge bumper design

3-Stairway and ladder design

4-Trolley and bridge brakes

5-Design and manufacture of electrical components

6-Hoisting equipment design and manufacture

There are several basic types of overhead cranes. OSHA’s laws and regulations apply to the following cranes.

1-Cantilever gantry

2-Gantry

3-Semi-gantry

4-Storage bridge

5-Wall

All of these require using the appropriate overhead crane parts for all repairs, as substitutions may result in accidents or defective operation of the machinery.

If you or your employees will be operating cranes and other heavy machinery, here are some safety tips to remember.

1-Cranes should only be used and operated by designated persons.

2-If a crane has been installed since 1971, it must meet all OSHA specifications.

3-An equipment manufacturer or engineer must inspect any crane that has been altered to change its load capacity.

4-You must have a cleared walkway on the side of the crane and above it.

5-You must clearly mark the load capacity of a crane so that everyone who might operate it can see it.

6-If a crane has two or more hoists, you have to clearly mark the load capacity of each hoist so that everyone who might operate it can see it.

ProservAnchor Crane Group, Inc. ( http://www.proservanchor.com/ ) our extensive expertise and service commitment, we maintain a fully stocked warehouse of hoists, overhead crane parts and accessories.

How to remove a stern drive engine from a boat?

I have a friend who has an old stern drive SeaRay that he just wants to give to me. The only problem is the engine needs work. Any tips on working on stern drive engines? And will a standard engine hoist be tall enough to pull the motor or will I need to find some way of getting a gantry hoist (really hard to do where the boat will be)?

wikapedia will probably help good luck

Gottwald MK 1500 , new configeration pt 3 ,closeup shots of gantry sheaves and hoist